1. High Performance Friction Material: Aggressive pads that provide the highest level of performance. 2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better “bite”. 3. Mounting Brackets and Assembly Hardware: Aircraft quality included and pre-torqued specifications. 4. Stainless Steel Braided Brake Line: DOT/TÜV approved. 5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel. 6. Four or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers. Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminium alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT Junior lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high performance driving, and fit into the budget of any enthusiast.